Categories
Engineering

i need 1-13 answer and mostly 10-13 (Question 11: Complete the Table.) Record t

i need 1-13 answer and mostly 10-13
(Question 11: Complete the Table.)
Record the voltage level every 10 sec until fully charged
Charging Time (sec) Measured value of Vc (V) Theoretical value of Vc (V)
0 ? ?
10 ? ?
20 ? ?
30 ? ?
40 ? ?
50 ? ?
60 ? ?
(Question 12: Plot the graph of the measured value of Vc and theoretical value of Vc against charging time.)
(Question 13: Compare the results and comment on the differences between the curves.)
____________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________

Categories
Engineering

Also a power point presentation which should have :

I need a detailed research paper done on an Optimization topic/problem in egineering. Also a power point presentation which should have :
A comprehensive and clear description
of the optimization technique including:
– Theoretical background and/or
example
– Solution methodology
– Fields of application
– Results and analysis (if applicable)
Presentation has clear structure, with opening, body and close.
– Audiovisuals appropriate; enhance understanding; uncluttered,
and legible. Visuals complement what speaker is saying.
– Presentation flows smoothly and ends on time.
– Methods never distracted the audience from the substance
– Combination of methods and media was creative to the extent
that one felt like emulating it

Categories
Engineering

Provide argumentation on the common cause analysis approach to be used from the three covered in this module: particular risk analysis, zonal safety analysis, common mode analysis.

Cyber threats are becoming more prevalent in the aviation domain, and many of them could have significant safety implications. To mitigate the risk, simple replication of components is not enough, because two or more identical components can be compromised at the same time by exploiting a common software vulnerability. This is one of the clear cases in which a common cause (exploiting an existing software vulnerability) could disable, at the same time, both the main controller and the secondary one, and thus transitioning the controlled system directly into a failed state. Provide argumentation on the common cause analysis approach to be used from the three covered in this module: Particular Risk Analysis, Zonal Safety Analysis, Common Mode Analysis. Provide also a simple mitigation approach.

Categories
Engineering

3-4 sentences summarizing the summary in a presentable format

1. The summary of the review paper
2. Your understanding on the review paper
3. Your thoughts or opinions on the review paper
4. 3-4 sentences summarizing the summary in a presentable format
Please use your own words and only citations from the article. No copyright or plagiarism material of course.

Categories
Engineering

Assignment

Goals
The purpose of this homework is to learn to define a real data science project including data collection, pre-processing, and analysis steps using project management techniques. (100 points)
Assignment
Complete this assignment in a word document, with sections that correspond to the requirements below.
Report (2 pages maximum): Describe the project that you proposed in homework 1 in terms of data science
1. Updated Description of the Project
2. Elevator Pitch
3. Updated Project objectives
4. Project scope
5. Data analysis and Solution (with updated workflow sketch)
6. Outcome of project
7. Include as an appendix the original description that you wrote for homework 1 / 5, which you can update it based on comments or new understanding making sure you highlight your changes in red font
1. Updated description of the problem — These are the questions you posed about the data in the earlier homeworks and your motivation to pose those questions
2. Elevator pitch — An abbreviated description of the problem (#1 above) summarized in 1-2 sentences.
3. Updated project objectives — This is a description of the datasets that you will be using, and the pre-processing that you would need to do.
4. Project scope — This is a brief discussion about things that you would NOT address in your project.
5. Data analysis and solution — This is the kind of data analysis that you plan to do, and the workflow sketch showing the analysis steps.
6. Outcome of the project — What you would expect to result from the project (for example a new product, an extension of an existing product, a new recommendation, etc)
***Items 1, 3, & 5 were already part of Homework 5. You should use what you wrote there, updated as needed.

Categories
Engineering

Provide also a simple mitigation approach.

Cyber threats are becoming more prevalent in the aviation domain, and many of them could have significant safety implications. To mitigate the risk, simple replication of components is not enough, because two or more identical components can be compromised at the same time by exploiting a common software vulnerability. This is one of the clear cases in which a common cause (exploiting an existing software vulnerability) could disable, at the same time, both the main controller and the secondary one, and thus transitioning the controlled system directly into a failed state. Provide argumentation on the common cause analysis approach to be used from the three covered in this module: Particular Risk Analysis, Zonal Safety Analysis, Common Mode Analysis. Provide also a simple mitigation approach.

Categories
Engineering

No copyright or plagiarism material of course.

1. The summary of the review paper
2. Your understanding on the review paper
3. Your thoughts or opinions on the review paper
4. 3-4 sentences summarizing the summary in a presentable format
Please use your own words and only citations from the article. No copyright or plagiarism material of course.

Categories
Engineering

Assignment

Goals
The purpose of this homework is to learn to define a real data science project including data collection, pre-processing, and analysis steps using project management techniques. (100 points)
Assignment
Complete this assignment in a word document, with sections that correspond to the requirements below.
Report (2 pages maximum): Describe the project that you proposed in homework 1 in terms of data science
1. Updated Description of the Project
2. Elevator Pitch
3. Updated Project objectives
4. Project scope
5. Data analysis and Solution (with updated workflow sketch)
6. Outcome of project
7. Include as an appendix the original description that you wrote for homework 1 / 5, which you can update it based on comments or new understanding making sure you highlight your changes in red font
1. Updated description of the problem — These are the questions you posed about the data in the earlier homeworks and your motivation to pose those questions
2. Elevator pitch — An abbreviated description of the problem (#1 above) summarized in 1-2 sentences.
3. Updated project objectives — This is a description of the datasets that you will be using, and the pre-processing that you would need to do.
4. Project scope — This is a brief discussion about things that you would NOT address in your project.
5. Data analysis and solution — This is the kind of data analysis that you plan to do, and the workflow sketch showing the analysis steps.
6. Outcome of the project — What you would expect to result from the project (for example a new product, an extension of an existing product, a new recommendation, etc)
***Items 1, 3, & 5 were already part of Homework 5. You should use what you wrote there, updated as needed.

Categories
Engineering

The exercise has two versions (word and excel).

The materials of Dynamic Programming Lab Exercise have been uploaded for your reference. The exercise has two versions (word and excel). You may use one of two versions to complete your own exercise.

Categories
Engineering

Make your best interpretation based on the provided

Prepare a preliminary geotechnical assessment report (PGAR) summarizing existing and former known surface and subsurface conditions, potential seismic hazards (fault rupture, ground shaking, liquefaction, slope instability and lateral spreading), and potential geologic hazards (flooding, scour, expansive soil, collapsible soil, compressible soil, sea level rise, and erosion) at the proposed project site based on the following information provided herein (check Canvas module PGAR) and material available online through Google Scholar (legitimate, peer-reviewed sources only; blogs/opinions not okay): • Boring records for historic explorations (Note: Some of the group symbols used in 1988 are different from those currently used). Make your best interpretation based on the provided descriptions. • Available maps and reports that could include (but are not limited to): o Geology, landslide, Alquist-Priolo fault zone, liquefaction potential, and flood maps o City/County General Plan o Google Earth historic imagery
The report requirement details are in the attached file PGAR Scope 85 101 HOV.pdf under DELIVERABLE. Please take a look at this file before you start since all the detailed steps are listed to guide you through this report.
There’s an example for you to have a better view of this report too. The actual report that you need to work on is not that long, it’s just an example of the steps.
There are couple calculations but I will provide you with the result soon so please start working on other parts.